Front-load washer built into a laundry nook next to a window with clothes hanging to dry

Same-Day & Emergency Electrolux Appliance Repair in Monsey, NY

An Electrolux washer that won't drain, a door that won't open, or a wall oven flashing F10? We provide same-day Electrolux appliance repair in Monsey, NY for front-load washers, dryers, wall ovens, ranges and fridges. Our phone line is open 24 hours, and a drum full of water or a warm fridge is an emergency. Searching for Electrolux appliance repair near me? We're close by.

E20The Electrolux washer code for a drain problem. A clogged pump filter is the first thing to check.

What's Your Electrolux Doing?

Choose the problem. You'll see the usual Electrolux causes, a safe first check, and how soon to call.

Close view inside the stainless steel drum of a front-load washer

Washer won't drain, or shows E20 or E21

Same day

What's likely going on

  • Pump filter behind the small front flap is clogged with lint, coins or hair.
  • Drain hose is kinked or blocked.
  • Drain pump is jammed or worn out.
  • Too much soap made foam. Some models show EF2.

Try this first

  • Put towels down, open the small flap, and drain the pump filter slowly into a pan.
  • Use less HE detergent on the next load.

Water left in the drum? The door may stay locked until it drains. More on washer repair.

Call (845) 792-8746

Washer won't fill, or shows E10 or E11

Same day

What's likely going on

  • Taps behind the washer aren't fully open.
  • Inlet hose is kinked, or its screen is clogged.
  • Water inlet valve has failed.
  • Flow sensor sees no water. Some models show EF4.

Try this first

  • Open both taps all the way.
  • Check the hoses behind the washer for kinks.

Water too hot on a cold wash? E62 can mean the hoses are swapped. More on washer repair.

Call (845) 792-8746

Washer door won't open, or E40 shows

Same day

What's likely going on

  • Water is still in the drum, so the lock stays on.
  • Door didn't close all the way. E40 points here.
  • Door lock has failed.
  • Control isn't releasing the lock.

Try this first

  • Pick Spin and press Start to empty the drum.
  • Wait for the key symbol to go off before you pull the door.

Stacked washer and dryer? The same steps apply. More on stackable washer dryer repair.

Call (845) 792-8746

Dryer won't heat, or loads stay damp

Same day

What's likely going on

  • Lint filter is full or coated.
  • Vent behind the dryer is crushed or full of lint.
  • Heating element or gas igniter has failed.
  • Thermal fuse blew after the dryer ran too hot.

Try this first

  • Clean the lint filter before every load.
  • Check the vent hose behind the dryer for crushed spots.

Vent full of lint? That's a fire risk and slows drying. See dryer vent cleaning.

Call (845) 792-8746

Wall oven or range shows F10, F30 or F90

Same day

What's likely going on

  • F10 means the oven ran too hot, and the control shut it down.
  • F30 or F31 means the oven probe is open or shorted.
  • F90 to F94 point to the door lock.
  • F1 means a key on the touch pad is shorted.

Try this first

  • Turn the breaker off for a minute, then back on.
  • If the door stays locked after self-clean, let the oven cool all the way first.

Cooktop locked? On many models, hold Off for 6 seconds to unlock it. More on wall oven repair.

Call (845) 792-8746

Fridge is warm, or food isn't staying cold

Call now

What's likely going on

  • Condenser coils are dusty, so heat can't escape.
  • Evaporator fan has stopped, so cold air isn't moving.
  • Door seal is torn, or the door doesn't close all the way.
  • Ice maker area in the fridge has iced up on some French door models.

Try this first

  • Pull food away from the vents so air can move.
  • Make sure both doors close all the way.

Food at risk? Move it to a cooler and call our 24-hour line. More on refrigerator repair.

Call (845) 792-8746

Electrolux Appliances We Repair

Laundry first, plus ovens and fridges. Every Electrolux appliance repair starts with the model number on the label.

Stainless oven and cooktop seen through a doorway into a small kitchen

Front-Load Washers

Electrolux washer repair for front-load washers with drain, fill or door lock codes like E20, E10 and E40.

Dryers

Electrolux dryer repair for gas and electric dryers, including steam models, that won't heat or take too long.

Stacked Laundry

Electrolux washers and dryers stacked in a closet or nook. Tight spaces need careful work.

Wall Ovens

Electrolux wall oven repair for single and double ovens with F10, F30 or F90 codes, or no heat.

Ranges and Cooktops

Gas, electric and induction ranges and cooktops that won't heat or show a code.

Refrigerators

French door and counter-depth Electrolux fridges that run warm, leak or won't make ice.

Electrolux Washer Door Won't Open? Start Here

A locked door is one of the most common Electrolux washer calls. Most of the time, water is still in the drum.

1check the drum

Water still inside?

If water is left in the drum, the lock stays on and the key symbol stays lit. That's normal.

2run spin

Empty the drum

Pick Spin, lower the speed if you need to, and press Start. When the key goes off, the door opens.

3still locked

Call for help

If the key stays lit after Spin, the lock or the control may have failed. Don't force the door.

Never force the doorPulling hard can break the handle or the lock, and it costs more to fix.

Mind the hot waterWater in the drum or pump filter can still be hot. Let it cool first.

Clean the pump filterA clogged pump filter is a top reason the drum won't drain.

How an Electrolux Repair Visit Goes

Five steps, so the code stays gone.

Step one

Find the model

The label tells us which Electrolux you have and which parts fit.

Step two

Read the code

E and F codes point us to the right system fast.

Step three

Test the part

Pumps, locks, valves and sensors are tested before anything is replaced.

Step four

Fix it right

Parts made for your model, with the price agreed first.

Step five

Run it through

A full wash, dry or bake test, so you know it's fixed.

Have a Frigidaire too? Frigidaire is Electrolux's sister brand in the US, so many parts and fixes are shared.

Call (845) 792-8746

What Affects the Cost of Electrolux Appliance Repair

The part that failed sets most of the price. Here's how common Electrolux repairs compare. You'll hear the full price first.

Smaller repairs

Often fixed in one visit.

  • Pump filter clean-out
  • Inlet hose screens
  • Lint and vent clean-out
  • Door gasket

Mid-size repairs

Common Electrolux parts.

  • Drain pump or inlet valve
  • Washer door lock
  • Dryer heating element or igniter
  • Oven probe or bake element

Larger repairs

Worth it on newer models.

  • Washer motor or main board
  • Oven control board
  • Sealed system or compressor

Other things that change the price

  • Type of appliance
  • Part that failed
  • Gas or electric dryer
  • Stacked or side by side
  • Age of the model

There is a service call fee for the visit and diagnosis. We tell you the amount on the phone, before we book.

Repair or replace?

Most Electrolux appliance repair jobs are worth it. Filters, pumps, locks and valves cost far less than a new machine. If an older washer needs a motor and a board together, we'll compare the repair with a new one first. Buying new? See appliance installation.

Electrolux Repair for Monsey Homes

Big laundry loads and busy kitchens. Here's what that means for repairs.

Many loads a week

Front-load washers clean well, but lint and small items collect in the pump filter. In a big family, check it every few months.

Shabbos and Yom Tov

Many Electrolux wall ovens and ranges have Sabbath mode. If yours won't turn it on or off, see Sabbath mode repair.

Before Pesach

Self-clean works the oven door lock hard. If it stays locked or shows F90 after, call us. Book an appliance maintenance check a few weeks ahead.

Good to know: before you call, check where to find the model number on your Electrolux. It helps us bring the right part. We also handle cooktop repair and microwave repair for Electrolux owners. Live in Nanuet? See appliance repair in Nanuet. Also on our list: Bosch and Maytag.

Six Ways to Keep Your Electrolux Running

Simple habits that prevent many Electrolux service calls.

Clean the washer pump filter

Every few months. Keep towels and a shallow pan ready.

Use HE detergent, and less of it

Too much foam can stop a cycle.

Leave the washer door open

Let the drum and gasket dry between loads.

Clean the dryer lint filter

Before every load, so the dryer runs cooler and faster.

Let the oven cool after self-clean

The door stays locked until the oven is cool.

Keep the fridge vents clear

Don't block the air path between the freezer and fridge.

Electrolux Repair Questions

Straight answers to what Monsey families ask about Electrolux appliances.

Door locked with water inside?

Try a Spin cycle first. If the key symbol stays lit, call our 24-hour line.

Call (845) 792-8746

What Electrolux appliances do you repair?

We repair Electrolux front-load washers, dryers, stacked laundry, wall ovens, ranges, cooktops and refrigerators. Electrolux appliance repair is one of our most common laundry calls in Monsey.

What does E20 mean on my Electrolux washer?

E20 and E21 point to a drain problem. A clogged pump filter or a kinked drain hose is the most common cause, and the drain pump can also fail. Clean the pump filter first. If the code comes back, call us for Electrolux washer repair.

Why won't my Electrolux washer door open?

The door stays locked while water is in the drum. Pick Spin to empty it, then wait for the key symbol to go off. If it stays lit, the lock or control may need Electrolux washer repair. Please don't force the door.

What do E10 and E11 mean on my Electrolux washer?

They mean the washer isn't filling right. Check that both taps are fully open and the hoses aren't kinked. If the screens are clean and it still won't fill, the inlet valve may need Electrolux washer repair.

Why is my Electrolux dryer not heating?

A full lint filter, a clogged vent, a burned-out heating element or igniter, or a blown thermal fuse are common causes. Clean the lint filter and check the vent first. If it still won't heat, book Electrolux dryer repair.

Why does my Electrolux dryer take so long?

Lint in the filter or the vent is the usual cause. A crushed hose behind the dryer slows the air too. If the vent is clear and drying is still slow, call us for Electrolux dryer repair.

What do F10, F30 and F90 mean on my Electrolux wall oven?

F10 means the oven ran too hot and shut down. F30 and F31 point to the oven probe. F90 to F94 point to the door lock. Turn the breaker off for a minute. If the code stays, call us for Electrolux wall oven repair.

Why is my Electrolux refrigerator warm?

Dusty coils, a stopped fan, a torn door seal or ice built up in the ice maker area are common causes. Clear the vents and check the doors close. If it's still warm, call our 24-hour line.

Is Electrolux the same company as Frigidaire?

Yes. Frigidaire is Electrolux's sister brand in the US, so many parts and fixes are shared. We repair both.

How much does Electrolux appliance repair cost, and can you come today?

It depends on the appliance and the part. A clogged pump filter costs far less than a motor or control board. There's a service call fee, and you hear the full price before we start. Call in the morning and we can often come the same day. Our phone line is open 24 hours.

Your Electrolux, Fixed Today

Same-day Electrolux appliance repair in Monsey, NY and nearby towns, including Electrolux washer repair, Electrolux dryer repair and Electrolux wall oven repair.

Call (845) 792-8746
Call now24-hour emergency line(845) 792-8746